
{{ variable.name }}
Model 128A is a 160 g/㎡ plain weave fiberglass woven fabric built from E225 1/3 yarns in both warp and weft, with 17.2 warp and 13.4 weft filaments per cm at 0.21 mm thickness. The balanced construction delivers good flexibility, fast resin wetting and stable dimensions during cure — a practical reinforcement and insulation fabric for general prepreg, multi-layer PCB inner layers, lightweight FRP and thin fireproof panels.

Model 128A is designed for buyers who need a moderate-grammage, easy-to-handle fiberglass cloth rather than a heavy structural mat. Because warp and weft use the same E225 1/3 yarn and the weave is uniform plain, the fabric wets out quickly in resin and holds its dimension while the laminate cures. That combination keeps laminate thickness and registration repeatable across production runs, and keeps surface defects low on thin panels.
The fabric is produced by Zhejiang Hongyan New Material Co., Ltd. on KARL MAYER sizing and combining machines and warping lines, then woven on DORNIER and Toyota air-jet looms and DORNIER rapier looms.
| Model | 128A |
|---|---|
| Product type | Fiberglass woven fabric |
| Material | Fiberglass |
| Weave | Plain weave |
| Warp yarn | E225 1/3 |
| Weft yarn | E225 1/3 |
| Weight | 160 g/㎡ |
| Thickness | 0.21 mm |
| Warp density | 17.2 fil./cm |
| Weft density | 13.4 fil./cm |
Model 128A is the specification documented on this page: 160 g/㎡, 0.21 mm, E225 1/3 warp and weft, plain weave. Buyers comparing it against heavier cloth should note that the moderate grammage is what gives 128A its flexibility and its fast wet-out on thin laminates.
Where a project needs a different construction, Hongyan develops and manufactures woven industrial fabrics tailored to professional customer requirements, and order quantity is customized per order.
The fabric is woven entirely from fiberglass yarn. Warp and weft both use E225 1/3 yarn, interlaced in a plain weave at 17.2 warp and 13.4 weft filaments per cm, giving a 160 g/㎡ fabric at 0.21 mm thickness. The symmetric warp/weft build is what keeps the cloth balanced and dimensionally stable when it meets resin.
Yarn preparation runs on KARL MAYER sizing and combining machines, parallel-beam warping machines and slitting warping machines, which process various specifications of fiberglass yarn. Weaving is carried out on DORNIER and Toyota air-jet looms and DORNIER rapier looms.
Field installations of this fabric type have been recorded under continuous filtration, high pressure, chemical and abrasive service, outdoor civil engineering with high load and soil moisture, high humidity, alkaline cement contact and wide temperature ranges.
Order quantity is customized per order. The weaving platform handles various specifications of fiberglass yarn, so buyers with a specific construction requirement can discuss it directly with the technical team. Final roll format and delivery details are confirmed against the agreed order specification — no standard stock sizes are assumed on this page.
Client type: composite material manufacturer
Markets served: KR, CN, JP, TR, DE, US, CA, IN
Quantity: customized quantity per order
Status: still in operation
Application: reinforcement of walls, plaster and road base; solid-liquid filtration in chemical and mining processes; fireproof covering during welding and high-temperature work; cargo protection and weather shielding.
Reported results: no cracking, enhanced strength, reduced maintenance, stable filtration, less downtime, lower replacement cost, zero fire incidents, fabric intact after heat exposure, waterproof and UV-stable in outdoor use, goods protected.
Both warp and weft use E225 1/3 fiberglass yarn, woven plain at 17.2 warp and 13.4 weft filaments per cm.
160 g/㎡ and 0.21 mm.
The fabric is specified with excellent resin wetting performance, stable dimensional change during curing, and good electrical insulation and flame retardancy — the properties used in general prepreg and multi-layer PCB inner layers.
Electronics, PCB, CCL, composite materials, construction, fire insulation, wind power, automotive, railway, marine, aerospace, anti-corrosion engineering, pipeline lining, outdoor equipment, FRP molding and electrical insulation.
ISO 9001:2015 quality management (05325Q30237R1M), ISO 14001:2015 environmental management (05325E30191R1M) and ISO 45001:2018 occupational health and safety (05325S30180R1M), issued by Beijing NGV Certification Center Co., Ltd. on 2025-04-30 and valid to 2028-04-29.
Yes. Order quantity is customized per order, and the mill weaves on KARL MAYER sizing and combining equipment plus DORNIER and Toyota air-jet and DORNIER rapier looms.
Recorded installations cover outdoor building use with high humidity, alkaline cement contact and wide temperature ranges, reporting no cracking, enhanced strength and reduced maintenance.