
{{ variable.name }}
Model 666 · 660 g/m² · 0.58 mm · 16.4 × 14.8 fil./cm · G37 1/3 yarn both directions
SEO TitleDense 660gsm Fiberglass Woven Fabric Model 666 For Filtration And Road Base
Meta DescriptionModel 666 fiberglass woven fabric, 660 g/m² and 0.58 mm thick, 16.4 x 14.8 fil./cm, for filter press media, road base and outdoor plaster reinforcement.
URL Slug/fiberglass-woven-fabric-666-filtration-road-base
Model 666 is a 660 g/m² fiberglass woven fabric with a 0.58 mm profile and a 16.4 × 14.8 filaments per centimetre warp and weft structure. That woven density is what the fabric is specified for in demanding service: it is installed on filter press plates for continuous pressure filtration in chemical and abrasive environments, and laid as a continuous layer under road base, around drainage, or as a static reinforcement layer in plaster before finishing. Project records for this specification report stable filtration, less downtime, no cracking and enhanced strength, with the material still in operation.
A 660 g/m² woven build specified for continuous pressure filtration cycles and high-load ground contact.
Dense, even warp and weft spacing keeps filtration results stable and spreads load across reinforcement layers.
Balanced tear resistance and formability, so rolls can be cut, laid and fixed without distorting.
Specified where the media meets chemical and abrasive process streams in chemical and mining filtration.
Project records report waterproof, UV-stable performance under sun, rain, wind and temperature fluctuation.
| Parameter | Value |
|---|---|
| Model | 666 |
| Material | Fiberglass |
| Warp yarn | G37 1/3 |
| Weft yarn | G37 1/3 |
| Areal weight | 660 g/m² |
| Thickness | 0.58 mm |
| Warp density | 16.4 fil./cm |
| Weft density | 14.8 fil./cm |
Continuous filament fiberglass yarn is woven into model 666 with G37 1/3 yarn in warp and weft at 16.4 and 14.8 filaments per centimetre, giving 660 g/m² at 0.58 mm. Warp preparation uses KARL MAYER sizing and combining machines with parallel-beam and slitting warping; weaving uses DORNIER and Toyota air-jet looms and DORNIER rapier looms. The glass structure is flame retardant and weatherproof, and the tight, consistent weave is what supports filtration stability and long service on site.

Model 666 at 660 g/m² is the published configuration. Where a project needs a different yarn count, weight or density, the specification is developed to order on the supplier's KARL MAYER and DORNIER / Toyota loom lines and confirmed with the buyer before production, rather than being offered as a fixed catalogue item.
Quantity is customized per order in existing project records, and roll format, yarn specification, areal weight and density outside model 666 are developed against the buyer's drawing. The supplier runs a 110,000 m² plant with 30 engineers and a provincial R&D centre for high-tech enterprises, and states that fabrics are manufactured to professional customer requirements.
A composite material manufacturer working across KR, CN, JP, TR, DE, US, CA and IN uses this specification with quantity customized per order. Installed on filter press plates under pressure filtration cycles, laid under road base and drainage, and used as a static reinforcement layer in plaster, the reported results are stable filtration, less downtime, lower replacement cost, no cracking, enhanced strength and reduced maintenance. In fireproof covering duty the record reports zero fire incidents and the blanket intact after heat exposure; in outdoor cargo protection the goods stayed protected, with the material still in operation.
It is installed on the filter press plates and operates under pressure filtration cycles in continuous filtration, including chemical and abrasive environments.
Project records report waterproof and UV-stable performance under sun exposure, rain, wind and temperature fluctuation, and the glass construction is documented as weatherproof.
Scenario records for this fabric list outdoor building conditions including high humidity and alkaline cement exposure, together with a wide temperature range.
ISO 9001:2015 (05325Q30237R1M), ISO 14001:2015 (05325E30191R1M) and ISO 45001:2018 (05325S30180R1M) from Beijing NGV Certification Center Co., Ltd., valid to 2028-04-29, with a scope covering fiberglass woven fabric.
They are not published for model 666. Records show quantity customized per order, so MOQ, roll format and schedule are confirmed with the sales team against your project.
Tell us the duty — filtration, reinforcement, fireproof covering or cargo protection — plus roll format and target quantity, and we reply with a matched construction.
Contact: Jonan · Email: jonan.xie@vip.163.com · Tel: +86 138-0672-5139 · WhatsApp: +86 182-6836-8006
Zhejiang Hongyan New Material Co., Ltd, No. 18, Jingbian 8th Road, Warp Knitting Industrial Zone, Haining, Zhejiang, China
| Filename | Alt Text |
|---|---|
| fiberglass-woven-fabric-666-660gsm-surface.jpg | Model 666 660 g/m² fiberglass woven fabric surface detail for filtration and reinforcement |
| fiberglass-woven-fabric-666-filter-press.jpg | Model 666 woven fiberglass fabric installed on a filter press plate |
| fiberglass-woven-fabric-666-road-base.jpg | Model 666 glass fabric laid under road base as a reinforcement layer |